If your USB ports are physically broken, and your soldering skills are up to the task, you can find standard issue USB connectors here:
http://www.newark.com/product-details/text/mcm/html/83-9414.html
Jul 24, 2006
Charlie, aka youfo, writes:
Here's another source for the USB connector. See Figure 1 in the USB section of the page.
link to PDF: Digikey: http://dkc3.digikey.com/PDF/T062/0338.pdf
You want part # ED90001-ND. I have used a couple of those on Cube logic boards. They're not difficult to replace, but you need to have some soldering skills, and the proper tools to remove the solder from the existing connector.
